Fully Synthetic Oil 5W-30 – Peugeot & Citroën
Fully Synthetic Oil 5W-30 – Peugeot & Citroën
Redex 5W-30 is a fully synthetic engine oil developed for modern petrol and diesel vehicles including those fitted with exhaust after-treatment units that require an ACEA C2 grade.
Redex 5W-30 Fully Synthetic Oil offers high-quality lubrication and withstands higher and lower temperatures than conventional oil, reducing engine wear and emissions.
It also lasts longer, with no need for additional oil treatments, to keep you driving for longer.
Fully synthetic oil is renowned for its exceptional protection, longevity, and performance. Our lab-developed solution offers maximum performance in all conditions, prolonging the life of your engine.
Our premium synthetic oil lasts longer between service intervals, meaning you don’t need to change it as often. This is convenient for you, saves you money, and reduces waste oil.
Redex Fully Synthetic 5W-30 is the benchmark in performance engine oil, providing outstanding wear and temperature protection to keep your car running at its best.
Your car deserves to run on premium engine fluids, and Redex 5W-30 is guaranteed to protect moving parts for longer than other oil grades.
This variant of engine oil is developed for engines that require ACEA C2 grade, and is recommended for:
- ACEA C2
- PSA B71 2290
Find the Oil you Need
Name:Redex Fully Synthetic Oil 5W-30 – Peugeot & Citroen – 2 Litres
Manufacturer’s Code: RMTN0011A
How to Use:
Check the owner’s manual to ensure you have the correct oil for your vehicle. You can also check the Redex Oil Finder to ensure you have the correct Redex Oil for your vehicle.
Ensure your vehicle is parked on a flat surface to get an accurate oil level reading.
It’s best to check the oil when the engine is cool or has been off for a few minutes. This allows the oil to settle back into the oil pan for a more accurate reading.
Open up the bonnet of your car and locate the oil dipstick. It’s usually a brightly colored handle labeled “Engine Oil” or similar.
Pull the dipstick out of its tube and wipe it clean with a rag or paper towel. This ensures any excess oil doesn’t skew your reading.
Fully reinsert the dipstick back into its tube, making sure it’s seated properly.
Pull the dipstick out again and observe the oil level. There are typically two marks on the dipstick—a “low” mark and a “full” mark. The oil level should fall between these two marks. If it’s below the “low” mark, you’ll need to top up the oil.
If the oil level is low, remove the oil filler cap located on the top of the engine. Using a funnel, carefully add small amounts of the recommended oil grade for your vehicle. Be cautious not to overfill, as this can cause damage to your engine.
After adding oil, wait a few moments for it to settle, then recheck the oil level using the dipstick. Continue adding oil in small increments until the level is between the upper and lower markings.
Once you’ve reached the correct oil level, securely tighten the oil filler cap back onto the engine.
Find the Oil you Need
Click here to use the Redex Oil Finder
SDS InformationYou can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Holts’ website.
This link takes you to a database containing MSDS sheets for all Holts products, including Tyreweld, Gun Gum, Radweld, Wondarweld, De-Icer and more. Simply select the relevant product in the drop down and you will be provided with all regulatory information for any Holts product.
If you have any further questions or concerns about Holts products or our ingredients, you can contact our chemists here. Our experienced team use rigorous testing and follow regulatory procedures to bring you safe, high quality products, and our team will be happy to help you with your query.
Redex 5W-30 Fully Synthetic Oil offers high-quality lubrication and withstands higher and lower temperatures than conventional oil, reducing engine wear and emissions.
It also lasts longer, with no need for additional oil treatments, to keep you driving for longer.
Fully synthetic oil is renowned for its exceptional protection, longevity, and performance. Our lab-developed solution offers maximum performance in all conditions, prolonging the life of your engine.
Our premium synthetic oil lasts longer between service intervals, meaning you don’t need to change it as often. This is convenient for you, saves you money, and reduces waste oil.
Redex Fully Synthetic 5W-30 is the benchmark in performance engine oil, providing outstanding wear and temperature protection to keep your car running at its best.
Your car deserves to run on premium engine fluids, and Redex 5W-30 is guaranteed to protect moving parts for longer than other oil grades.
This variant of engine oil is developed for engines that require ACEA C2 grade, and is recommended for:
- ACEA C2
- PSA B71 2290
Find the Oil you Need
Name:Redex Fully Synthetic Oil 5W-30 – Peugeot & Citroen – 2 Litres
Manufacturer’s Code: RMTN0011A
How to Use:
Check the owner’s manual to ensure you have the correct oil for your vehicle. You can also check the Redex Oil Finder to ensure you have the correct Redex Oil for your vehicle.
Ensure your vehicle is parked on a flat surface to get an accurate oil level reading.
It’s best to check the oil when the engine is cool or has been off for a few minutes. This allows the oil to settle back into the oil pan for a more accurate reading.
Open up the bonnet of your car and locate the oil dipstick. It’s usually a brightly colored handle labeled “Engine Oil” or similar.
Pull the dipstick out of its tube and wipe it clean with a rag or paper towel. This ensures any excess oil doesn’t skew your reading.
Fully reinsert the dipstick back into its tube, making sure it’s seated properly.
Pull the dipstick out again and observe the oil level. There are typically two marks on the dipstick—a “low” mark and a “full” mark. The oil level should fall between these two marks. If it’s below the “low” mark, you’ll need to top up the oil.
If the oil level is low, remove the oil filler cap located on the top of the engine. Using a funnel, carefully add small amounts of the recommended oil grade for your vehicle. Be cautious not to overfill, as this can cause damage to your engine.
After adding oil, wait a few moments for it to settle, then recheck the oil level using the dipstick. Continue adding oil in small increments until the level is between the upper and lower markings.
Once you’ve reached the correct oil level, securely tighten the oil filler cap back onto the engine.
Find the Oil you Need
Click here to use the Redex Oil Finder
SDS InformationYou can find SDS/regulatory safety information for our products here. You can also find this link at the bottom of every page on Holts’ website.
This link takes you to a database containing MSDS sheets for all Holts products, including Tyreweld, Gun Gum, Radweld, Wondarweld, De-Icer and more. Simply select the relevant product in the drop down and you will be provided with all regulatory information for any Holts product.
If you have any further questions or concerns about Holts products or our ingredients, you can contact our chemists here. Our experienced team use rigorous testing and follow regulatory procedures to bring you safe, high quality products, and our team will be happy to help you with your query.
